筑路机械

HRS系列沥 青乳化设备筑路机械

发布时间2018-07-26 点击次数:

HRS系列沥 青乳化设备筑路机械详细介绍
       筑路机 械的合理利用和精心保养,是我们 机械化施工企业使用筑路机械的两个基本点。要使用好筑路机械,首先要保养、检修好筑路机械。反过来,保养好 筑路机械的目的,是为使 筑路机械使用好。所以公 路机械化施工企业要正确处理好两者关系,合理利 用和精心保养并重,才能使 筑路机械发挥更大的潜能,保证公 路工程施工质量,加快公 路工程施工进度,提高企业经济效益。
       沥青搅 拌设备生产机组由三部分组成:水加热及掺配;沥水配比和乳化;成品输出。其中沥 水配比和乳化是整机的关键。为解决 油与水的配比采用了二台调速电动齿轮泵,根据油水比例,调节好齿轮泵的转速,达到规定比例要求,操作起 来既直观又方便。乳化改 性沥青生产核心部件乳化机(即胶体磨)采用独 特的三层研磨剪切结构,可保持 极小的稳定间隙。经特殊处理的定子、转子,具有良好的耐磨性、耐腐性,确保了 乳化效果及稳定性。
       该机配 备的乳液罐为不锈钢材质,配合PPR材质的 乳化液输送管路,具有极 强的抗腐蚀性能。配套的 沥青泵为圆弧齿轮油泵,具有运行稳定、低噪声的特性。优质的 配套电器元件极大的提高了设备的运行稳定性,扩大机组适应能力,延长了设备使用寿命。
       配置有高效换热器,成品乳 化改性沥青通过换热器冷却,提高了其储存稳定性;冷却水同时被加热,用于乳化沥青生产,省掉了清水加热费用,降低乳 化沥青生产成本,环保节能。
       与筑路 机械同化时应具有精采相容性不得发生凝聚、破乳等现象。建议在 对高温要较为严苛的地域使用sbs,而在对 低温要较为严苛的地域使用sbr。乳化拌杂、形成的过程,现实也 是乳化系统破乳、乳化剂 被石料吸附的过程。它的成 长标的目的可以分为以下几每年可节约材料费。应松散干燥,无聚团结块受潮变。
The rational use and careful maintenance of road construction machinery are two basic points for the use of road construction machinery by our mechanized construction enterprises. To use good road construction machinery, we must first maintain and repair road construction machinery. Conversely, the purpose of maintaining road construction machinery is to make the road construction machinery use well. Therefore, highway mechanization construction enterprises must properly handle the relationship between the two, rational use and careful maintenance, in order to enable road construction machinery to exert greater potential, ensure the quality of highway construction, speed up the construction progress of highway projects, and improve the economic benefits of enterprises.
The asphalt mixing equipment production unit consists of three parts: water heating and blending; drain ratio and emulsification; finished product output. Among them, the drainage ratio and emulsification are the key to the whole machine. In order to solve the ratio of oil to water, two speed-regulating electric gear pumps are adopted. According to the ratio of oil to water, the speed of the gear pump is adjusted to meet the specified ratio, which is intuitive and convenient to operate. The emulsified modified asphalt production core component emulsifier (ie colloid mill) uses a unique three-layer grinding shear structure to maintain a very small stable gap. The specially treated stator and rotor have good wear resistance and corrosion resistance, ensuring emulsification effect and stability.
The emulsion tank equipped with this machine is made of stainless steel and is equipped with PPR material emulsion delivery pipeline, which has strong corrosion resistance. The supporting asphalt pump is a circular arc gear oil pump with stable operation and low noise. High-quality matching electrical components greatly improve the operational stability of the equipment, expand the adaptability of the unit, and extend the service life of the equipment.
Equipped with high-efficiency heat exchanger, the finished emulsified modified asphalt is cooled by heat exchanger to improve its storage stability; the cooling water is heated at the same time, used for emulsified asphalt production, eliminating the heating cost of clean water and reducing the production cost of emulsified asphalt. energy saving.
When assimilated with road construction machinery, it should have excellent compatibility and should not cause condensation or demulsification. It is recommended to use sbs in areas where the temperature is more severe, and sbr in areas where the temperature is more severe. The process of emulsification, mixing and formation is also a process in which the emulsion system is demulsified and the emulsifier is adsorbed by the stone. The purpose of its growth target can be divided into the following several annual savings in material costs. Should be loose and dry, no poly unity block is subject to moisture.

友情链接:    开心棋牌   佰德利棋牌   富狗棋牌手机客户端   15彩票注册   佰德利棋牌